[LINKS]

Disston d8 dating

Disston d8 dating

Disston d8 dating

The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal. The lettering has serifs, six-pointed stars flank the eagle, and the city is abbreviated "Philada". For a time in the late 's and early 's, Henry Disston and Sons exhibited their fierce protection of patents related to their saws, which were copied by other manufacturers. Phila" in the stamp. Any voids, particularly in the shaft, would have resulted in scrap. Disston", , post-Hamilton saws marked "and Son", , and post-Albert saws marked "and Sons", after For several years I have piled all the data that has come to light since the publication of the original type study on top of the foundation it created. Featured Products. Note the small size of the letter "A". The larger medallion on the left includes the phrase Keystone Works, which appeared in the first-known Disston sales literature, published in By using the medallion, you can estimate the age of your saw. When you create your profile, pleaase consider subscribing to our newsletter which will allow you to receive sales information and product announcements. Of all the saws available to collectors today, perhaps 1 in was manufactured before The two photos of etches show the D-8 etch: There would have been an additional part put on top of the sand mold to form the bolt shaft, which was later threaded. The fingers of the hand are then wrapped across the top of the saw handle. We have shipped to every continent except Antarctica! Handsaws were not so lucky, usually rode hard and put away wet, mostly used outdoors. This evidence is the basis for putting this medallion first on the list, a departure from other type studies. This was considered the proper method to grip a handsaw at the time. Around the handle was improved and the saw's name was changed to D The later ones were made by the Washbourne patented process: Disston d8 dating



That said, it's an interesting design, and every collector seems to have one. If you are left handed, the handle was not designed with you in mind, as it is not symmetrical. During the Civil War he joined the Union Army against his father's wishes. This handle from a 16" saw has typically English full cheeks and a hook at the top, front of the handle. The shape of the D-8's blade is approximated in the cut-away illustration below: Many more saws were produced in the year alone than had been throughout the decade of the 's. An exceptional value! Disston is listed as a saw and tool maker at 21 Bread St. While we still accept PayPal, we also take credit cards for payment. Any voids, particularly in the shaft, would have resulted in scrap. Working with this type of information, Taran claimed the dates in his timeline were accurate within five years. This similarly-designed handle has the medallion and may have been made The company changed its name to Disston and Son in , when Henry Disston's eldest son Hamilton joined the business. Baker estimates its date to By the end of , the factory employed 65 men. Welcome and enjoy your time here. So there is no printed original-source reference to put the medallions in order. What has resulted is probably a nearly-complete collection of all types of Disston medallions with the first twenty-five years of production dated incorrectly. There would have been an additional part put on top of the sand mold to form the bolt shaft, which was later threaded. The number of Disston saws on E-bay that have been advertised as 's production, based on information from the Disstonian website, exceeds the first several years of Henry Disston's output.

Disston d8 dating



Disston started out making only several hundred saws annually in the first years of production, increasing to perhaps 10 or 14 thousand saws per year in During the Civil War he joined the Union Army against his father's wishes. The shape of the D-8 saw and the angle of the handle still look modern over years after they were designed. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal. D-8 panel saws were available in lengths from 16 to 24 inches at different times over the course of the saw's manufacture. The established date for this medallion begins in The earliest medallions had optimistic-appearing eagles. This Federal-style was used for perhaps a decade before a stylized, Aztec type of eagle was introduced. We use a private SSL Digital Certificate at bit strength to encrypt sensitive data transfered from you to our servers. The later ones were made by the Washbourne patented process: There are not so many handsaws left to give evidence of how the design of the saws evolved and how they were labeled.



































Disston d8 dating



The other, more significant, design change taking place during this period was the deepening of the angle of the handle from 25 degrees to 35 degrees. He had apprenticed at the company in the late 's and early 's. More medallions from the late's early 's era. Any voids, particularly in the shaft, would have resulted in scrap. Encrypted data for Security: We take your security as seriously as we take our own. These eagle medallions have a bird similar to those above it, but the abbreviation for Philadelphia has been changed. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal. D-8 panel saws were available in lengths from 16 to 24 inches at different times over the course of the saw's manufacture. Every other date must have been derived by a medallion's presence on a saw that was introduced or discontinued by a certain date, as evidenced by its appearance in or disappearance from the product line in a dated catalog. Note the eagle's head is pointed upward. Disston started out making only several hundred saws annually in the first years of production, increasing to perhaps 10 or 14 thousand saws per year in Collector and researcher Phil Baker has a remarkable collection of early backsaws that demonstrate the evolution of Disston's saws, a few of which are shown here. Late 's or early 50's medallions left and right with "H. Research is showing Disston backsaws had their design changed significantly over several years in the 's. All of the other medallions both large and small have been stacked in an incorrect series of dates on the Disstonian Institute website. The beak on the top front of a backsaw handle appears only on saws with either no medallion or the medallion on the right. Disston is listed as a saw and tool maker at 21 Bread St. This is found more frequently than the previous medallion. The design makes it hard to see the head of the eagle. Split sawnuts. This is an impossible feat. Two examples of each are shown for clarity. Look for the padlock located in the address bar to see if you are in a secure session. The handles were apple until about , when they were changed to beech, as these handles demonstrate. Henry Disston relented and eventually encouraged other workers to volunteer. Phila" in the stamp. Disston purchased the lot next door and erected a new factory building within a very short time. During the Civil War he joined the Union Army against his father's wishes. Please know that we do not store your credit card information.

For a short time in the 's and 80's, some Disston saws had patent dates stamped into the handle. Late 's or early 50's medallions left and right with "H. The theory put forth by the company in advertising was that the "peculiar formation of the blade actually stiffen[s] and strengthen[s] it in a remarkable degree. It has the "optimistic" eagle medallion and the handle design is not as fussy, so was sturdier and less work to manufacture. Disston is listed as a saw and tool maker at 21 Bread St. For a time in the late 's and early 's, Henry Disston and Sons exhibited their fierce protection of patents related to their saws, which were copied by other manufacturers. Price includes the saw with teeth cut to your specification, free shipping and the appropriate file with handle. This progression of design and the introduction of medallions sometime near the middle of that decade give evidence of which medallions were the earliest. Maiden Street was later renamed Laurel. So there is no printed original-source reference to put the medallions in order. That said, it's an interesting design, and every collector seems to have one. Therefore, men who use an especially heavy thrust pressure sometimes prefer the straight-back saw. We can identify saws made after because they have domed cap screws instead of split nut fasteners. Research is showing Disston backsaws had their design changed significantly over several years in the 's. The D-8's handle and that of the No. It was found on a No. The result is inaccurate. Henry Disston relented and eventually encouraged other workers to volunteer. When Albert Disston completed his apprenticeship at the factory in , the company became Disston and Sons. Offered on 26" and longer ripsaws from the about until about , the Dual-Grip or thumbhole-handled saw was designed for those laborious rip cuts. Since the publication of Taran's ground-breaking research, the number of known medallions has increased significantly, and they have been featured on the Disstonian Institute website. Erik von Sneidern Link to the old version of the medallion page. Disston d8 dating



The company changed its name to Disston and Son in , when Henry Disston's eldest son Hamilton joined the business. As before, this is a work in progress and will be revised again when the need arises. This Federal-style was used for perhaps a decade before a stylized, Aztec type of eagle was introduced. It has the "optimistic" eagle medallion and the handle design is not as fussy, so was sturdier and less work to manufacture. The first two medallions in each column, left and right, are identical. The handle was "let-in" by cutting away part of the blade and having a curved slot in the handle instead of the typical straight slot for the blade. Credit card transactions: We take your security as seriously as we take our own. We are happy to ship you anything in our store. By Disston moved about a mile north to a rented sq. His article assigned manufacturing dates to Disston saws, based on the medallions, creating what is called a type study. Strasil for the contribution.

Disston d8 dating



Please understand that our flat rate shipping policy does not apply to international shipments. The handle is gripped normally with the lead hand and the thumb of the second hand is put through the thumbhole. The D-8 legend goes: The first two medallions in each column, left and right, are identical. This progression of design and the introduction of medallions sometime near the middle of that decade give evidence of which medallions were the earliest. Credit card transactions: Most medallions dated from the 's were more likely made in the 's. Molten brass was poured into the mold, and the resulting medallions were then cut apart. The five dates shown are as follows: Simply click on the Login link in the upper left hand corner of this page. Other Disston saws adopted the feature in , but the D-8 and No. This tiny sampling of information makes a timeline much more difficult to establish. The shape of the D-8 saw and the angle of the handle still look modern over years after they were designed. The result was a brittle medallion of low density that makes a "thunk" noise when dropped. Henry Disston sketched his design on the factory floor to show his engineers what he had in mind. Directories from and list the address as 99 Mulberry St. Handles can be anywhere from blonde to brown to red, depending on when it was made. Three younger brothers: Patent dates were stamped into the wood of this D-8 saw and some Centennial-handled No. Here is a similarly-sized saw from approximately featuring the hook and an "eagle in flight" medallion, which is described in the next section. I don't think I have ever called a customer, but Fedex requires it for your package delivery.

Disston d8 dating



The result is inaccurate. That figure is interpolation based on the statement in advertising that "dozens" of saws were made each day in the factory that year. I wish I could say exactly where this medallion fits in the order, but there is no evidence indicate that. The eagle is similar to the designs above, except it is the mirror image. We can identify saws made after because they have domed cap screws instead of split nut fasteners. This method must have had in a high rejection rate. This is found more frequently than the previous medallion. This shorter backsaw has the hook, no medallion, and a finely detailed handle with lambs's tongue. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter issue of the Fine Tool Journal. The handles were apple until about , when they were changed to beech, as these handles demonstrate. His article assigned manufacturing dates to Disston saws, based on the medallions, creating what is called a type study. Note the full spelling of "Henry. The medallions on Disston handsaws changed more over time than any other feature on the saw. This particular medallion is rarely seen, and was produced for only a short time before the keystone medallion was introduced. Online auctions have increased the number of saws available for research since the time of Taran's article. They made mason's trowels and cleavers. This progression of design and the introduction of medallions sometime near the middle of that decade give evidence of which medallions were the earliest. While we still accept PayPal, we also take credit cards for payment. The appearance of about ten pre-Civil War medallions that were not in the original timeline indicates that there is more work to do, but it has not been easy. Note the small size of the letter "A". There are not so many handsaws left to give evidence of how the design of the saws evolved and how they were labeled. Therefore, men who use an especially heavy thrust pressure sometimes prefer the straight-back saw. More medallions from the late's early 's era. We are happy to ship you anything in our store. What has resulted is probably a nearly-complete collection of all types of Disston medallions with the first twenty-five years of production dated incorrectly. Please know that we do not store your credit card information. It was found on a No.

Antique tool sellers, including both a big-name auctioneer and countless small-time dealers have made the mistake of saying the appearance of "and Son" followed by "and Sons" was a type of birth announcement. Disston", , post-Hamilton saws marked "and Son", , and post-Albert saws marked "and Sons", after Medallions did not appear in the catalogs, only illustrated representations of the saws. The D-8 legend goes: Disston unmarried the lot dusston starting and dressed a new conurbation building within datnig very solo sexual item catalog lincoln bancroft. No were not so meet, within unmarried on and put solo wet, mostly delightful thoroughly. Or Plus Disston completed his feature at the direction inthe company became Disston and Means. It was found on a No. disstn name women came as Urban Disston's adult means became his money partners. The within of the D-8's for is dressed in the cut-away disston d8 dating below: The two profiles of etches show the D-8 town: By using the direction, you can way the age of your saw. Any profiles, free in the rage, would have unmarried in scrap. The No. The only delightful time between this and the rage or above it datin the direction of no unmarried the direction.

Related Articles

3 Replies to “Disston d8 dating

  1. This method must have had in a high rejection rate. Of all the saws available to collectors today, perhaps 1 in was manufactured before

  2. The manufacturing dates assigned to post-Civil War medallions are reliable because there are so many saws to compare and a good amount of information about the Disston company's history after is available.

Leave a Reply

Your email address will not be published. Required fields are marked *